Starting a Service Business in New Hampshire: The Trades That Fit, and What It Takes to Open (2027)

start a business in new hampshire

Starting a Service Business in New Hampshire: The Trades That Fit, and What It Takes to Open (2027)

An earlier version of this post presented a shortlist of New Hampshire service businesses to start in 2026. That ranking has been retired — nobody measured the trades against each other, and a ranking nobody measured is marketing, not information. This is a state launch guide, filed with the blog’s city launch guides because the blog keeps one local shelf. What follows is what can be measured: fees written into the statute itself, the absence of any state contractor licence, the demand in the state’s own numbers, and one Portsmouth owner’s start. The trades are presented as fit argued from that evidence — not as a list with a winner.

Forming the company in New Hampshire

New Hampshire writes its LLC fees into the LLC Act itself. An LLC is formed by filing a Certificate of Formation (Form LLC-1) with the Secretary of State, and RSA 304-C:191 sets the fee: $100. The same statute section sets the recurring charge — an Annual Report at $100, due on or before April 1 each year, with a $50 late fee written into the statute for reports filed after April 1. There is no online-versus-paper puzzle to solve and no fee schedule to chase: the numbers are in the law, and they make New Hampshire’s state layer $100 in and $100 a year, every year, predictably.

No contractor licence at all

New Hampshire has no state general contractor licence — and goes further than most unlicensed states: there is no home-improvement contractor registration and no handyman licence either. None of them appears in the regulated-professions framework of the Office of Professional Licensure and Certification (OPLC). General building and remodeling are controlled through local building permits, issued by the city or town where the work happens. The licensed layer is two boards inside OPLC. The Electricians’ Board licenses master and journeyman electricians. The Mechanical Licensing Board licenses master and journeyman plumbers, and carries the heating credentials alongside: fuel gas installation, piping and service technicians, and certified oil heating technicians. There is no standalone HVAC licence — heating work runs through those fuel-gas and oil-heating credentials. Everything else in the home-services economy — cleaning, lawn care, painting, carpentry, roofing — carries no New Hampshire state licence; the paperwork is the formation filing, the annual report, insurance, and the local permit where a job needs one.

The demand underneath

New Hampshire’s case is affluence and age in a small state. The Census Bureau’s QuickFacts for New Hampshire puts the July 1, 2025 population at 1,415,342, up 2.7% from April 2020, across 662,160 housing units and 555,822 households. The median household income is $99,031 — among the highest in this series — and the median owner-occupied home value $402,500, with 72.8% of homes owner-occupied and 5,030 building permits issued in 2025. The age mix is the story: 23.0% of residents are 65 or over — the oldest share in this batch — against just 17.3% under 18, and 89.3% of residents were in the same house a year earlier. Read together: high-income owners, ageing in valuable homes they are not leaving, in a state with no income-tax pitch needed because the numbers make it themselves. New Hampshire demand is owners with money buying help to stay in the houses they already own.

A Portsmouth painter who chose the trade over the internship

Sean Sturk began painting in high school and was good enough at it to be put in charge of paint crews while still a teenager. After college — degrees in business and marketing — he chose painting over the traditional career path, and deepened the craft from the other side of the counter by owning and operating a retail paint store. In 2000 he took over Minute Men Painters in Portsmouth, and built it into a regional name for low- and no-VOC, non-toxic work — the company tests new low-VOC products itself rather than taking manufacturers’ claims at face value, as the New Hampshire Business Review’s profile tells it. The division of labour is deliberate: Sturk handles sales and marketing, while co-owner Christopher Tufts runs project management and quality assurance and keeps the company current on products and practices. The mix is 60% residential and 40% commercial, the service area runs from southern Maine and the Seacoast to Massachusetts’ North Shore, most new business arrives by referral, and every employee is trained in lead safety — a programme the profile credits with the company’s strong retention. The New Hampshire lesson is specialisation inside an unlicensed market: when the state issues no credential, the reputation and the niche are the credential.

start a business in new hampshire — a smiling painter covered in paint

Where a launch service fits a New Hampshire launch

Azgari is a business launch and management service. It designs, builds, and manages new service businesses for owners — many of them still employed — and the owner keeps 100% of the business and pays $0 in royalties. Engagements are priced in three tiers, $20,000, $40,000, and $60,000+, and a launch runs 90 to 180 days; with the business’s own startup costs included, owners should expect to stay under $265,000 all-in for the launch and first year, with Azgari managing the business through its first year. In New Hampshire the state layer is $100 in and $100 a year with no contractor credential to obtain, and the launch decisions are the trade line — licensed electricians and plumbers hired or partnered for that work — and the market itself: the oldest, highest-income owner base in this batch. See the businesses Azgari can launch and Azgari’s New Hampshire launch page. Two guides on this blog go deeper on the ground: what a painting business costs to start and the handyman business licence guide.

New Hampshire in the Census Bureau’s numbers

The American Community Survey’s 2024 1-year profile for New Hampshire, published by Census Reporter, puts the state’s population at 1,409,032 people across 8,953.8 square miles — about 157 people per square mile — with a median age of 43.6. There are 570,689 households, averaging 2.4 people each, and 90% of residents were in the same house a year earlier. The housing stock runs to 657,198 units, 87% occupied, with 73% owner-occupied and 68% in single-unit structures; the median owner-occupied home value is $458,800. Median household income is $99,782, per capita income $53,064, and 7.2% of residents live below the poverty line. The state is also well educated — 95.1% of adults hold a high school diploma or higher and 41.5% hold a bachelor’s degree or higher — with 6% foreign-born residents and 81,535 veterans.

Those figures sit beside, not against, the QuickFacts numbers already in this post: the QuickFacts estimate for July 1, 2025 puts the population at 1,415,342, the housing stock at 662,160 units and households at 555,822, with a median household income of $99,031 and a median owner-occupied home value of $402,500. The two sources are different vintages of the same picture, and the picture is consistent — a small, affluent, settled state. The 5,030 building permits issued in 2025 are about 0.8% of the housing stock, roughly one permit for every 132 homes. And the median age of 43.6 is the oldest in this series of state guides, which is the point for a service business: an older, settled homeowner base is a base that keeps paying for upkeep.

The filing layer: what the state actually requires

The Secretary of State’s Corporations hub is the front door, and its LLC fee schedule is the price list. Filing the Certificate of Formation (Form LLC-1) costs $100, and the same schedule prices the small moves around it: reserving a name is $15, changing a registered agent or office is $15, amending the certificate is $35, and cancelling it is $35. The forms are filled in online, then printed, signed and mailed in, with checks payable to “State of New Hampshire”. One line on the schedule changes the headline number: every fee paid electronically carries a $2.00 handling charge under RSA 5:10-a, in place since July 1, 2004 — so the “$100 in” figure this post prints is $102 when the filing goes in online. The Corporations hub and the LLC fee schedule are both on the Secretary of State’s site.

Staying formed costs the same $100 every year. The Annual Report fee is $100, due on or before April 1 each year, with a $50 late fee for reports filed after April 1 — both figures are on the same fee schedule, and both match the statute the post already cites, RSA 304-C:191. The report is filed online through NH QuickStart, the Secretary of State’s online filing system. That is the whole recurring state obligation for a single-member LLC: one filing a year, one fee, one deadline.

start a business in new hampshire — fall foliage in the White Mountain National Forest

The licence layer: two boards, and nothing else

The first board is the Electricians’ Board, under RSA 319-C. It licenses electricians in two grades, master and journeyman. A licence in either grade takes 8,000 hours of service as an apprentice electrician, not less than 600 hours of education, and passing a board-approved examination, and the chapter also carries a high/medium voltage electrician licence. The licence certificate is publicly displayed at the principal place of business or carried on the person, and apprentice electricians register with the office. Several sections of the chapter were repealed in 2023, so the statute as it stands today is the one to read — the licensing provisions are in RSA 319-C:7.

The second board is the Mechanical Licensing Board, at RSA 153:27-a. Its licence list, at RSA 153:29, runs to nine types: hearth system installation and service technician, fuel gas installation technician, fuel gas service technician, fuel gas piping installer, fuel gas trainee, domestic appliance technician, and master, journeyman and apprentice plumber. There is no standalone HVAC licence in the list — heating work is credentialed through the fuel gas and oil heating technician certifications. The old standalone Plumbers chapter, RSA 329-A, is repealed; licensing now sits with this board. The permit layer sits underneath both boards in the building code, RSA 155-A: a permit is required before starting work, and where a municipality has an enforcement mechanism the permit follows the locally adopted process; the building official must act on a completed application within 30 days, or 60 days for nonresidential work or more than 10 dwelling units, under RSA 155-A:4. One note on sourcing: the Office of Professional Licensure and Certification’s own site was unreachable while this post was being researched, so the statutes themselves — the General Court’s published RSA — are the source cited here.

Reading the numbers already in this post

Put the numbers already in this post next to each other and they tell a coherent story. The state layer costs $100 to form and $100 for the first Annual Report — $200 for the first year of state fees, or $102 and $102 if both filings go in online, where the $2 handling charge applies; a name reservation is $15 and an amendment $35. The 5,030 building permits issued in 2025 are about 0.8% of the 662,160 housing units — roughly one permit for every 132 homes — which is a steady, unhurried building market, not a boom. The age mix is the demand: 23.0% of residents are 65 or over against 17.3% under 18, the oldest and most settled base in this batch, with 89.3% of residents in the same house a year earlier. And the resale numbers point the same way: the 2025 Cost vs. Value Report’s New England Region figures — no New Hampshire market is published, so these are the nearest published benchmark, not New Hampshire figures — put a garage door replacement at 349.3% of cost recovered and a steel entry door at 182.9%, the two highest-recouping and two lowest-cost projects on the region list; a minor midrange kitchen remodel at 134.3%; and an upscale primary suite addition at 15.3%, the lowest recoup and the most expensive project on the list, with an accessory dwelling unit at $173,734 spent for $70,654 recovered, or 40.7%.

The sequence reads as a ladder. There is no licence threshold to cross to start: the state layer is $100 in and $100 a year, and the licensed trades — electrician, plumber, heating — sit behind the two boards, for owners who choose a licensed trade rather than an unlicensed one. The permit layer is local, under RSA 155-A, with a 30-day clock on a completed application. Cleaning, lawn care, painting, carpentry and roofing need no New Hampshire state licence at all. And the state ticket is small against the launch ticket: $200 for the first year of state fees against under $265,000 all-in for the launch and first year with Azgari managing — the state’s share of the opening cost is the rounding.

start a business in new hampshire — a freshly painted room interior

The 4 ways to launch a business — compared honestly

Almost every first-time owner picks one of four doors. Here is what each one really costs, what you control, and what you keep — side by side.

Buy a franchise
Their brand, their rules
Cost to open
$265K–$573K
Royalties
✕ ~8% of sales
every year, ~10-year contract
Keep your job?
✕ Usually no
owner must work in it
Who runs year one
You
inside the franchisor’s rules
The brand
✕ Theirs
Buy an existing business
Someone else’s business
Cost to open
$350K median
Royalties
– $0
but loan payments start day one
Keep your job?
✕ Rarely
needs you full-time at once
Who runs year one
You
alone, from closing day
The brand
– The seller’s
their reputation comes with it
Start on your own
Every job is yours
Cost to open
Lowest cash in
Royalties
– $0
Keep your job?
✕ Rarely
nights & weekends until burnout
Who runs year one
You
alone — every mistake is yours
The brand
– Yours
built the slow, hard way
★ The fourth way
Launch with Azgari
Built for you, run for you
Cost to open
Under $265K, all-in
launch + the full first year
Royalties
✓ $0 — ever
Keep your job?
✓ Yes — that’s the point
Who runs year one
✓ Azgari runs it with you
The brand
✓ 100% yours
Why owners pick this one
Lowest all-in cost of the four, no royalties ever, an expert team running year one — and you keep your paycheck while it launches.

The honest risk note: about 78 of 100 new businesses make it past year one, and about half reach year five (U.S. Bureau of Labor Statistics). No path removes risk — which is exactly why the guidance matters. Franchise figures are medians from a 259-franchise-disclosure-document sample; existing-business price is the BizBuySell 2025 median; Azgari figures are Azgari’s own published terms.

Questions New Hampshire owners ask

How much does it cost to form an LLC in New Hampshire?
$100 for the Certificate of Formation — the fee is written into RSA 304-C:191 itself. The Annual Report is another $100, due on or before April 1, and the statute adds a $50 late fee after that date.

Does New Hampshire license general contractors?
No — and it does not register home-improvement contractors or license handymen either. Building work is controlled through local permits. The state-licensed layer is electricians (Electricians’ Board) and plumbers and heating technicians (Mechanical Licensing Board), both inside the Office of Professional Licensure and Certification.

Is there an HVAC licence in New Hampshire?
No standalone one. Heating work is credentialed through the Mechanical Licensing Board’s fuel gas and oil heating technician certifications; general ductwork as such has no separate state licence.

Why does New Hampshire suit a service business launch?
Income and age: a $99,031 median household income, a $402,500 median home value, 72.8% owner-occupancy, and 23.0% of residents aged 65 or over — the oldest share in this batch — in homes their owners are staying in.

What does it cost to form and keep an LLC in New Hampshire?

$100 to form and $100 a year to keep. The Certificate of Formation (Form LLC-1) costs $100 under RSA 304-C:191, and the Annual Report costs $100 every year, due on or before April 1, with a $50 late fee after that date. The Secretary of State’s LLC fee schedule prices the small moves too: $15 to reserve a name, $15 to change a registered agent or office, $35 to amend the certificate, $35 to cancel it. One charge to watch: every fee paid electronically carries a $2.00 handling charge under RSA 5:10-a, so the “$100 in” figure is $102 when the filing goes in online.

When is the New Hampshire LLC annual report due?

On or before April 1 each year. The $100 Annual Report fee is set by RSA 304-C:191, and the statute writes in a $50 late fee for reports filed after April 1. The report is filed online through NH QuickStart, the Secretary of State’s online filing system. Put the date in the calendar when the LLC is formed: it is the one recurring deadline the state imposes, and the late fee is the only penalty for missing it.

Does New Hampshire license general contractors?

No. There is no general contractor licence, no home-improvement contractor registration and no handyman licence in New Hampshire. General building and remodeling work is controlled through local building permits issued by the city or town, under the state building code at RSA 155-A — a permit is required before starting work, and the building official must act on a completed application within 30 days, or 60 days for nonresidential work or more than 10 dwelling units. The licensed layer is two boards inside the Office of Professional Licensure and Certification: the Electricians’ Board and the Mechanical Licensing Board.

What licences do electricians need in New Hampshire?

Electricians are licensed by the Electricians’ Board under RSA 319-C, in two grades: master and journeyman. A licence in either grade takes 8,000 hours of service as an apprentice electrician, not less than 600 hours of education, and passing a board-approved examination. The chapter also carries a high/medium voltage electrician licence, the licence certificate is publicly displayed at the principal place of business or carried on the person, and apprentice electricians register with the office. Several sections of the chapter were repealed in 2023, so the statute as it stands today is the one to read.

What licences cover plumbing and heating work in New Hampshire?

The Mechanical Licensing Board, at RSA 153:27-a, and its licence list at RSA 153:29 runs to nine types: hearth system installation and service technician, fuel gas installation technician, fuel gas service technician, fuel gas piping installer, fuel gas trainee, domestic appliance technician, master plumber, journeyman plumber and apprentice plumber. There is no standalone HVAC licence in New Hampshire: heating work is credentialed through the board’s fuel gas and oil heating technician certifications, and general ductwork carries no separate state licence. The old standalone Plumbers chapter, RSA 329-A, is repealed — licensing is consolidated under the Mechanical Licensing Board.

What does a remodel return at resale in New England?

The 2025 Cost vs. Value Report publishes no New Hampshire market, so the nearest published benchmark is its New England Region figures, and they measure resale value recovered, not profit. On that list the two highest-recouping and two lowest-cost projects are both small exterior entries: a garage door replacement costs $4,317 and recovers 349.3% of its cost, and a steel entry door costs $2,547 and recovers 182.9%. A minor midrange kitchen remodel costs $28,936 and recovers 134.3%. At the other end, an upscale primary suite addition costs $374,737 and recovers 15.3% — the lowest recoup and the most expensive project on the region list. The lesson is scope: the cheapest, most visible changes return the most at resale, and the biggest additions return the least.

Ready to see which path fits you?

Start with a one-hour working session with Azgari Lipshy personally. You leave with a written plan that tells you which path fits and what it will cost. The fee is credited toward your launch if you sign.

Book a Consultation

Want to see how it works first? Visit azgari.com — Azgari Business Launch and Management services. BBB A+ Rated · 5.0 from 11 BBB customer reviews.

2 responses to “Starting a Service Business in New Hampshire: The Trades That Fit, and What It Takes to Open (2027)”

  1. […] Best Businesses to Start in New Hampshire […]

  2. […] New Hampshire: Top Service Businesses […]

Leave a Reply